Air Filter (12 filters / case): Compatible with Medivators Advantage Plus

ADV10 is a compatible filter for OEM Part MF01-0028.

The Medivators Advantage Plus Automated Endoscope Reprocessor has four air filters. Each filter should be replaced every 6 months. ADV10 are high-quality single direction replacement air filters. These filters provide extra protection from fluid back-flowing and possibly causing damage to the air compressor. Single-direction air filters provide superior filtration performance and maximize system protection. The 0.2 micron rating of the filter membrane provides added protection against bacteria entering the scope from the air supply. The filters have one blue and one white connector that match up with similar colored connections on the reprocessor. This provides an easy visual means of connecting the air filter in the proper flow direction. Connect the white male fitting on the filter to the white male connector in the reprocessor. Connect the blue male fitting on the filter connects to the blue female connector on the reprocessor.

Instructions for installing the Air Filter:

1. Open the right and left doors and locate the filters.

2. Remove one filter at a time. Move the filter away from the machine to allow access to the fittings

3. Press on Quick Connect fittings to release the filter.

4. Remove and discard the filter assembly.

5. Replace the filter by attaching the Quick Connect fittings. Ensure that the color coded fittings match.

6. Close the doors.

*The above is adapted from Medivators guides.

Medivators®, Advantage Plus®, and CER Optima® are registered trademarks of Medivators Inc. MedService Repair is not affiliated with Medivators and any and all references to Medivators® on this website are intended to be for informational purposes only. The products on this site have not been manufactured or approved by Medivators®.