Tip Protector Large

tip-pro_large_blue
tip-pro_large_bluemedservice_repair_tip_protectors_new_product_-_image_page_1medservice_repair_tip_protectors_new_product_-_image_page_2

Product Code: Tip Pro-Large



Tip-Small

  • Instrument Size:  7mm - 15mm Wide
  • Color: BLUE
  • Case of 100

  • Have you ever sent a scope to be repaired because of a damaged tip or lens?


    MedService Repair Tip Protectors are a low cost solution to reduce high cost repairs!


    MedService Repair Endoscope Tip Protectors: Superior Protection, Increased Infection Prevention

    MedService Repair Endoscope Tip Protectors are semi-flexible expandable mesh products designed for the protection of Endoscopes and delicate surgical instruments during transport and storage. The clean, non-absorbing, semi-flexible expandable mesh offers the sensitive tip of medical instruments protection from both front and side impact. MedService Repair Tip Protectors allow for airflow and moisture to escape, eliminating potential bacteria that is possible with other tip protectors.

     

  • Why do I need to use a tip protector for my endoscopes?

    During cleaning, reprocessing, transporting, and storing endoscopes the instrument routinely comes into contact with hard surfaces that can damage the scope tip and lens. Hard surfaces include plastic bins, stainless steel sinks, hard countertops, and other surfaces. Costs to repair endoscope tips and lens vary greatly and can cost well over $1,000 to address. Worse yet, any time an endoscope is out for repair, your facility is forced to operate without that scope, causing extra pressure on scope reprocessing timelines. In the worst case, lack of sufficient endoscope inventory may force you to delay and reschedule procedures.

     

  • Why is Expandable Mesh a better alternative to Foam Tip Protectors?

    MedService Repair Expandable Mesh Tip Protectors provide increased infection prevention and superior protection when compared to Foam Tip Protectors.

     

    Specifications

    MedService Repair Tip Protectors are a clean, non-sterile, non-absorbable material with a max temperature of 79°C / 174°F. Tip Protectors will not fall off and are not abrasive / will not scratch any part of the instrument / lens.

    Clean and sterile versions of both small and large Tip Protectors are available upon request.

     

  • An economical improvement to your endoscope cleaning, reprocessing, and storage process.

    MedService Repair Endoscope Tip Protectors are a low cost solution to reduce high cost endoscope repairs! Increased protection, decreased endoscope service needs. Contact your Account Manager today to ask about receiving a sample of the MedService Repair Endoscope Tip Protectors!

     

  • Instructions for Use

1.  Slide the smaller end of the tip protector over the end of endoscope that requires protection immediately after reprocessing.

2.  Allow 20 – 30% of the larger end of the tip protector to overhang the tip of the endoscope.

3.  Remove the tip protector just before the procedure during the final prep of the endoscope.

4.  At the completion of the procedure, perform bedside pre-cleaning and then put the same tip protector back on the endoscope before transport to decontamination.

5.  Do not remove the tip protector during transport and initial manual cleaning.

6.  Before the end of manual cleaning, remove and dispose of the tip protector and complete the manual cleaning of the endoscope tip (manually clean where the tip protector was).

  • For use when the scope is removed from the reprocessor, during storage, while transporting to and from the procedure room, and through decontamination
  • Designed for one-time usage